Why is my Dream Maker Spa not heating up?
Why is my Dream Maker Spa not heating up?
Heat and Jets Low or no heat may be the result when the filter is dirty or the jets are not fully open. Clean the filter and open the jets to test whether the heat problem resolves. If the jets won’t come on or if you notice no air bubbles, check that the power is turned on and the jets are fully open.
Where is the model number on a Dream Maker Spa?
You will find the serial number and spa model and color on a black plate, like the example below, affixed to your spa, either to the left or the right of the access door, near the floor.
What does PR mean on a Dream Maker Spa?
Pr = When spa is first actuated, it will go into Priming Mode. ILOC = Interlock failure – possible pump or ozone spike . (—) =Unknown water temperature.
What does EC mean on hot tub?
Economy
Ecn or Ec Message Ecn or Ec is Alternating with Temp: The Spa is Operating in the “Economy” (Ecn or Ec) Heating Mode. The Water Temperature is sampled Only during Programmed Filter Cycles. The Heater will only operate and Heat up to Set Temperature during the Filter Cycles.
What does F2 mean on hot tub?
The Big List of Spa and Hot Tub Error Codes
| CODE | ERROR CODE DESCRIPTION |
|---|---|
| F1, F2 | (Vita Spa) Blown fuse; replace fuse 1 or fuse 2 |
| F2 | 4 hours daily filtration; system message, not an error |
| F4 | 8 hours daily filtration; system message, not an error |
| F6 | 12 hours daily filtration; system message, not an error |
Why do hot tub jets stopped working?
Thankfully, the most common cause of jets not working is an air lock. Unlike on a spaceship, an air lock in your hot tub simply means that there is air in your plumbing lines which is affecting the function of your jets.
What does F4 mean on a hot tub?
8 hours daily filtration
The Big List of Spa and Hot Tub Error Codes
| CODE | ERROR CODE DESCRIPTION |
|---|---|
| F4 | 8 hours daily filtration; system message, not an error |
| F6 | 12 hours daily filtration; system message, not an error |
| F | Fahrenheit, used to indicate panel is in Fahrenheit mode; system message, not an error |
| FB-ER | Fiber optic error; accent lighting |
What mode should my hot tub be?
Economy is a good setting for those who use the hot tub daily. The drop in temperature fluctuates during the year from minor or no temperature falls in the summer, to larger drops in the coldest part of winter.
What mode should hot tub be on?
Using Economy Mode Rather than heating the water consistently to maintain your set temperature, economy mode will only heat the water during your scheduled filtration times. Simply put, economy mode reduces your hot tub energy costs by running your heater less.