Questions

When did 2GIG GC3 come out?

Standard

When did 2GIG GC3 come out?

July 2019
First released in late July 2019, the 2GIG GC3e became known for its strong build quality and stark similarities to its GC3 predecessor. But it had a hard time competing with fellow Alarm.com Security System, the Qolsys IQ Panel 2 Plus.

How do you turn off a GC3 panel?

To power down your GC3 and disable the system, complete the following steps:

  1. Disconnect battery power. Open up the GC3 Panel. Locate the backup battery connector that plugs into the panel.
  2. Unplug the transformer. Locate the AC transformer connected from the GC3.
  3. Confirm the shut down. Check the GC3 System.

How do I connect my 2GIG GC3 to WIFI?

Complete the following steps to connect your GC3 to WIFI:

  1. Access Network Settings. Start from the main screen of the GC3.
  2. Connect to WIFI. Choose Wireless.
  3. Return to home screen. Keep pressing the back arrow on the left side of the screen until you return to the home screen.

Is the 2GIG GC3 discontinued?

2GIG and Nortek have announced that many of their products have been discontinued, effective immediately.

What is a GC3?

Verizon LTE. The 2GIG-LTEV1-A-GC3 is a 4G LTE radio for the Verizon network to work with Alarm.com. This new radio transfers both data and two-way voice over Verizon’s 100% LTE network and VoLTE (Voice over LTE) technology. To enable the 2GIG-LTEV1-A-GC3 radio, the GC3 Panel requires Firmware version 3.1.

How do you power cycle a gc3?

How do you reboot the panel? You can power cycle the panel by unplugging AC power then the panel’s internal battery. Wait 30 seconds then plug the battery back in and then plug the AC power back in.

Can 2GIG be self monitored?

The 2GIG GC3 control panel can be monitored even if you self-install it. All you need to do is install a compatible cellular communicator.

What is the installer code for 2GIG?

1561
The default installer code for the 2GIG GC2 panel is 1561. If you are unable to access the Installer Toolbox, and the default installer code is not working, you can perform a hard reset to restore the installer code to default.

How much does a GC3 cost?

$7000
The base price of the GC3 launch monitor is $7000 and this includes an FSX 2020 software license with 10 courses.

How much is GC3 UK?

The GC3 retails for $7,000, which admittedly might be out of reach for most golfers, but with that, not only do you get more data than you get with other personal launch monitors, that data is actually reliable.