What should I torque my Ford Focus tires to?
What should I torque my Ford Focus tires to?
The recommended torque is 100ft lbs or 135Nm.
What are the torque specs on a Ford?
Ford Windsor Torque Specs
| Fastener Type | Torque Specs |
|---|---|
| Oil Pump Bolt | 23-28 ft.-lbs. |
| Cam Bolts | 40-45 ft.-lbs. |
| Cam Thrust Plate Bolts | 8-10 ft.-lbs. |
| Harmonic Damper Bolt | 70-90 ft.-lbs. |
How do I find the torque specs for my car?
Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can’t find that information, or if you don’t have a guide, you can find the specs in the service manual.
What is the lug nut torque on a 2009 Ford Focus?
Ford Wheel Lug Nut Torque Specs Recommendations
| Model | Trim | Torque |
|---|---|---|
| FOCUS | 15″BASE / S SEDAN | 100 ft-lbs |
| FOCUS | 14-INCH / BASE/ZX3 | 95 ft-lbs |
| FOCUS – ALL | 15″BASE / S | 100 ft-lbs |
| FREESTAR | VAN / BASE/S/SE | 100 ft-lbs |
What torque should lug nuts be?
Under- or over-tightening wheel-attaching hardware can be damaging and dangerous.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 12 x 1.25 mm | 70 – 80 | 8 |
| 14 x 1.5 mm | 85 – 90 | 7.5 |
| 14 x 1.25 mm | 85 – 90 | 9 |
| 7/16 in. | 70 – 80 | 9 |
How tight should lug nuts be torqued?
The general rule for steel wheel lug nut torque is usually around 80ft/lb, and for aluminum wheels it is around 100ft/lb, this being said you still need to check on the manufacturer’s specifications. Drive safe and secure, get your wheels checked.
How much horsepower does a 5.0 v8 have?
395 HP
5.0L Ti-VCT V8
| Horsepower | 395 HP |
|---|---|
| Max. Towing Capacity | 11,500 lbs. |
| Max Payload Capacity | 3,270 lbs. |
| MPG (city/hwy) | 17/23 |
| Available Axle Ratios | 3.15, 3.31, 3.55, 3.73 |
How do I know how much torque my bolts are?
After fastening the bolt, make use of a torque measuring tool to mark off the tightened bolt and the product/workpiece. Apply additional force in the tightening direction until movement is noticed. Recording the reading will indicate the residual torque originally applied to the joint.
What size lug nuts are on a 2007 Ford Focus?
Ford Focus 2007, Chrome Cone Seat OEM Style Standard Lug Nuts by Dorman®. Thread Size: M12 x 1.50. Hex Size: 19 mm.
How many ft-lbs should lug nuts be?
Lug nuts should be torqued to 100 ft/lbs.
What happens if lug nuts are over torqued?
Excessively tightened lug nuts can strip the threads, distort brake rotors, damage the wheel, and possibly shear off the lug stud.