Contributing

What port should I use for QNAP?

Standard

What port should I use for QNAP?

QNAP uses designated ports for communication. These ports are assigned to a specific service and users must manually open the required ports by adding the port number….Service Ports.

Service Name Default Port Number
NAS web 8080
NAS web (HTTPS) 443
NetBIOS/ Samba 137, 138, 139, 445
Network File System (NFS) 2049, 111, dynamic ports

How do I connect myQNAPcloud?

Get started

  1. Register your unique myQNAPcloud account (QID) in the QNAP account center.
  2. Install myQNAPcloud Link App from the QTS App Center and sign in with your myQNAPcloud ID (QID).
  3. Use the SmartURL to access your NAS by logging in with your device account and password.

How do I enable myQNAPcloud?

Registering a Device to myQNAPcloud

  1. Go to myQNAPcloud > Overview.
  2. Click Get Started. The myQNAPcloud wizard appears.
  3. Click Start.
  4. Specify your QNAP ID and password.
  5. Click Next.
  6. Specify a device name containing up to 30 alphanumeric characters.
  7. Click Next.
  8. Select the services you want to enable.

How do I connect to QNAP locally?

Steps

  1. Directly connect your NAS and computer using an Ethernet cable.
  2. Configure a Static IP address on your computer.
  3. Download and install Qfinder Pro.
  4. Run Qfinder Pro and open your NAS in File Explorer/Finder.
  5. Check your file transfer speed by copying a file to/from your computer and NAS.

What port does SMB use?

SMB has always been a network file sharing protocol. As such, SMB requires network ports on a computer or server to enable communication to other systems. SMB uses either IP port 139 or 445. Port 139: SMB originally ran on top of NetBIOS using port 139.

What is myQNAPcloud link?

myQNAPcloud Link is the best remote access service provided by myQNAPcloud and allows you to connect to your device via the Internet using the myQNAPcloud website (www.myqnapcloud.com).

Can I connect my QNAP directly to my computer?

If you want to connect your NAS directly, you can do it. Set up manual IP on your PC and NAS with a one in the same IP range. Than use Synology finder app or type IP in the address bar and it’s done. Maximum speed for regular network cable is 1Gb/s which is around 115MB/s in real life.

How do I access qnap on my computer?

Connect Qnap directly to a PC over LAN

  1. Make sure that the 2 devices are in the same IP subnet. For example: PC 1 IP address: 192.168.0.1 , subnet: 255.255.255.0. NAS Drive ip address: 192.168.0.2 , subnet: 255.255.255.0.
  2. Discover your NAS Through the Qfinder Pro discovery tool.

What port does smb3 use?

SMB has always been a network file sharing protocol. As such, SMB requires network ports on a computer or server to enable communication to other systems. SMB uses either IP port 139 or 445.

Is SMB port 445 TCP or UDP?

TCP
SMB is available directly over TCP (port 445) and over NetBIOS over TCP/IP (port 139). Other ports you may see connected with NetBIOS communications are port 137 (nbname) and port 138 (nbdatagram) over User Datagram Protocol.