What is the difference between RCA and phono?
What is the difference between RCA and phono?
The connectors male plug and female jack are called RCA plug and RCA jack. The word phono in phono connector is an abbreviation of the word phonograph, because this connector was originally created to allow the connection of a phonograph turntable to a radio receiver.
What are phono cables?
Phono cables are designed to connect a turntable or tonearm to a separate phono stage or phono input of a preamplifier. Phono cables are particularly important audio cables because low level output from the phono cartridge is very precise but also very fragile.
Is an RCA cable a phono cable?
The RCA connector The connector was essentially a phono connector used to interconnect a record player and a radio when they did not constitute a single device.
What is the difference between a phono cable and an interconnect cable?
If you therefore own a phono preamp, you will need another cable to connect your phono stage to an amplifier. In order to do this, you will need an interconnect cable. Interconnect cables are also offered with various connectors: RCA, XLR, DIN, etc. An interconnect cable is made for high output sources.
What is phono used for?
A phono input is an audio input that can be found on a preamplifier, an amplifier, or a stereo receiver. This type of audio connection accepts signals from analog turntables, which boosts and adds RIAA equalization to recreate the original sound.
Is a subwoofer cable just an RCA cable?
you can use a standard RCA cable, but a subwoofer cable is suggested as it has more shield in it and provides more clarity and resolution. a subwoofer cable comes with a standard RCA connector but is thicker than the standard RCA cable.
Can I use yellow RCA cable for audio?
Do you need Audio? Use the VGA video cable What connectors are on the back? Red/White/Yellow RCA S-Video White/Yellow RCA (This is mono audio. You can use the RCA cable, but not plug in the red.)
What is an RCA interconnect cable?
RCA interconnect cables are used to connect two or more components together in a home theater system, car audio system, or any audio system.
Can I use phono as aux?
Yes, the aux input on a receiver can be used for phono, but only if you use a stand alone phono preamp for your turntable or if your turntable has a built in phono preamp.
Is a phono connection in stereo?
What are the 3 wires in a AUX cable?
If we were to dissect the Aux Cable, there would be three wires – a ground cable (usually black or a shielded wire), a right signal cable (usually red) and a left signal cable (usually white or yellow).