What does E1 mean on a Whirlpool Duet dryer?
What does E1 mean on a Whirlpool Duet dryer?
The Whirlpool Duet Dryer Error E1 means the control has detected that the thermistor is open. This error can be a wiring issue from the control to the thermistor or a bad thermistor. In some cases it can be a bad control reporting false errors but this is not common.
How do you clear the error code on a Whirlpool Duet dryer?
If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.
What does E1 mean on a Whirlpool Duet washer?
E1 Error code means the correct water level has not been reached within 20 minutes of the washer starts.
What does E1 mean on a tumble dryer?
Dryer Error E01 The fluff filter of your dryer has become blocked with fabric softener residue (difficult to detect) or with fluff. Our advise is to clean the fluff filter after each drying cycle. Our Video shows how to clean your tumble dry filter. Cleaning and Care products. Back to overview.
Does unplugging a dryer reset it?
Reset your dryer Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
How do you clear a Whirlpool error code?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do you fix error code E1 F9 on a Whirlpool Duet washer?
If F9 E1 (drain pump system problem – long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
How do I fix the error code e01 f09 on my Whirlpool Duet washer?
1 – You may have a drain hose that is bent and not letting the water drain out – Check the back of the washer. 2 – Be certain the drain hose height does not exceed 96″ or the washer cannot drain properly. 3 – Clean the drain pump filter on the bottom front of the washer of any particles or objects.
How do you troubleshoot a Whirlpool Duet dryer?
Whirlpool Duet Dryer Will Not Start
- Check the Circuits. Always check that the dryer is receiving the proper amount of 240v current.
- Check the Door Latch. The dryer will not start if the door latch is malfunctioning.
- Check the Thermal Fuse. Inspect the thermal fuse.
- Check the Start Button.
Can I bypass dryer thermistor?
The thermal fuse will look like a thin strip of white plastic with a wire coming out of each end. In order to bypass the thermal fuse, use electrical tape to tape the two ends together. The thermal fuse will then be bypassed. Turn the dryer on to a heat cycle for no more than 90 seconds.