What do the lights on my PAX mean?
What do the lights on my PAX mean?
Battery Levels – Shake Pax to check your battery level: red blinks = less than 10%, yellow blinks = less than 80%, green blinks = 80% – 100% Charging – Pax will shine orange while charging and will turn green when your battery reaches at least an 80% charge.
Why is my PAX not working?
If you’re still having trouble, try restarting the app and your device. PAX 3 is likely off or out of range with your mobile device. If PAX 3’s LEDs are off, try turning the device on or putting it on the charger to turn it back on.
How do I check the battery on my PAX?
When you are using your PAX Era, you can check the battery level at any time by gently shaking the device. The LED indicator will display the current battery level, with each petal representing 25% battery life.
Why does my PAX light up red?
The light will blink red three times when the battery is discharged and needs to be charged. Please send a support request to the PAX Pros if you see a bunch of blinking lights other than the discharged battery indication.
How do I test my PAX battery?
How long does PAX battery last?
PAX 2’s battery lasts for approximately 5 to 10 sessions, while PAX 3 lasts from 8 to 10 sessions and PAX Era will support approximately 200 draws. You’ll know it’s time to recharge your PAX device when the LED indicator blinks red.
How do I factory reset my PAX s300?
Pax/s300 Reset to default
- Select #4 – RemoteDownload.
- Select #1 – New Download.
- Select #1 – TCP.
- Enter in IP Address: 216.238.144.195 or 50.79.90.190. Hit Enter Hit the Green Enter Key.
- Enter in Port Number 8582 or 8001. Hit the Green Enter Key.
- Select DHCP.
- Enter in Terminal ID: 30030030.
- Download should look like this.
Why is my PAX blinking red?
Low battery: The petals will turn red and blink three times before powering down.
How do I know if my PAX is charging?
PAX is fully charged in two hours. When placed on the charging platform, the PAX LED will shine orange. At 80% battery charge (around 90 min) the LED will shine a steady green.
How do I put PAX in party mode?
Party Mode is a secret PAX 2 setting which creates a spectacular light show when you take a hit. Instead of staying solid purple or green, each LED light will flash in different colors. The LED lights will also change colors in a circular fashion like a color wheel. To enter Party Mode, rotate the PAX three times.
How do you change the battery in a PAX?
TLDR; The PAX is one of the most well designed pieces of vaporizing equipment around….
- STEP 1 — Drill baby Drill.
- STEP 2 — Slide the guts out.
- STEP 3 — Disconnect the battery.
- STEP 4 — Remove the bad cell.
- STEP 5 — prepare the new cell.
- STEP 6 — Connect the new cell.
- STEP 6 — Re-install the outer shell.
- STEP 7 — Cry a little.
Does the Pax vaporizer need maintenance?
The Pax is elegant, discreet, and extremely portable. It does, however, require a bit of maintenance to keep it running up to expectations. Pax also states in the warranty that neglect of proper cleaning procedures could neglect the warranty. I’ve made this Pax vaporizer cleaning video to help you keep your Pax performing like new.
What do the Pax lights on my vape device mean?
PAX Lights: What Do They Mean? The indicator light on every PAX portable vaporizer model serves as a window into how your device functions. Those four little LED petals, arranged in the shape of the PAX logo, will change color, blink, and fade to reflect your device’s mode and status.
Why is the temp light on my Pax not working?
This is known as the Pax “Temp Light Issue”. Residue tends to build up in the area where the switch is that tells the unit to heat up. If this is happening I recommend you use the interdental brush from the cleaning list above and clean the area directly around where the vapor path travels. Then apply a small amount of lubricant to the mouthpiece.
What do the LED lights on the Pax 3 mean?
Low battery (PAX 3): The upper-left petal will blink red three times. While charging: The LED indicator will pulse white while charging. The LEDs will blink to confirm the temperature selection. While heating: Purple pulsing petals indicate the device is heating. When the device is ready: The lights will change from purple to green.