What are Windposts used for?
What are Windposts used for?
A Windpost is a structural product used in the construction of masonry walls to increase lateral stability and protect masonry panelling against horizontal forces such as wind, crowd or handrail loads. Windposts are normally constructed from mild steel, supported at the head and the foot between floor slab levels.
What is an Ancon Windpost?
Ancon Windposts are designed to span vertically between floors to provide lateral support for panels of brickwork. Windposts can be installed into either the inner leaf of blockwork or into the cavity leaving the blockwork undisturbed.
What is a Wi column?
WHAT IS A Wi COLUMN? Wi Columns provide lateral structural support for infill blockwork walls. They are a safer, stronger alternative to traditional windposts such as Ancon WP2, or WP3.
Do I need a wind post?
Wind posts would be used for example in the cavities of the walls used on either side of bi-fold or concertina type doors so that the entire end of the building can be glazed without the need for wide masonry returns on either side of the doors. This enables a much wider opening to be achieved.
What are wall ties made of?
These days, wall ties are predominantly manufactured from stainless steel which is now readily available commercially and withstands corrosion from water and cement without requiring additional protection.
How many types of columns are there?
These four types of columns were Doric, Ionic, Corinthian, and Tuscan. These columns look straight and uniform from a distance.
Where are columns most commonly used?
Columns are frequently used to support beams or arches on which the upper parts of walls or ceilings rest. In architecture, “column” refers to such a structural element that also has certain proportional and decorative features.
Why do wall ties fail?
Cavity wall ties can fail because of a construction defect or when they weren’t installed in the first place. It can also come from wall ties with incorrect spacing, fixing or using those that are too short. Poor quality mortar may have been used, failing to provide a strong enough bond for the ties.
Do solid walls need wall ties?
Wall ties are only present in cavity-constructed buildings. They are not present in a solid wall construction, be it either two or three bricks thick.
What is the weakest part of a masonry wall?
In a CMU loadbearing wall, the weakest component is the: mortar.
What is bed joint in masonry?
Definition of bed joint 1 : a horizontal joint in masonry. 2a : a horizontal crack or fissure in massive rock. b : one of a set of cracks or fissures parallel with the bedding of a rock.