What are the dimensions of a Fender Stratocaster?

What are the dimensions of a Fender Stratocaster?

Size Matters The run of the mill 60’s Strat body is 461mm/ 18.1” Long and 323mm/ 12.7” wide. They are also 44.5mm/ 1.75” thick.

How thick is a Stratocaster body in MM?

The standard thickness for a full-sized Strat body is 1.77 inches (45 millimeters). If you purchase a standard Squier Strat, the body is slightly thinner. It measures 1.57 inches (40 millimeters).

How is tremolo bar size measured?

You will need to use calipers to measure the arm or the arm hole. Measure in mm if it’s a metric tremolo or in inches if it’s USA made. You can go to any machine shop or Fastenal store for the measurement. Your arm diameter choices are generally 5mm, 5.5mm or 6mm for metric and 3/16” or 1/4” for USA.

How do you read a Japanese Fender serial number?

In 2012, Fender has transitioned the numbering scheme again with the new serial number starting with “JD” followed by an eight-digit number with “Made in Japan” decals. If your serial number starts with “JD” followed by an eight-digit number, the first two digits designates the year of manufacture.

How many inches is a Fender guitar?

38 inches
A typical full-size guitar is around 38 inches long (96.5cm) with a scale length of around 25.5 inches (64.8cm).

How long is a full size Stratocaster?

The Stratocaster’s scale length is 25.5 inches (648 mm).

How thick should a guitar body be?

Top thickness targets for classic guitars are given as around . 100” (2.5 mm) for spruce and . 110” (2.8 mm) for softer wood such as cedar. For steel string guitar the recommendation is 1/8” (.

How thick is a Fender Mustang?

At 1.5″ thick, the Mustang’s body is a quarter inch thinner than the Stratocaster, and a veritable wafer when compared to the thickest parts of the Les Paul’s carved-top mountain.

What size is Fender tremolo arm?

Genuine Fender Squier Standard Strat tremolo arm with white tip, PA112210. Threaded section diameter is . 231″ or 5.87mm.

Are all tremolo bars the same?

The different types of whammy bars There are two main types of whammy bars – detachable like Fender and Floyd Rose, and those that go with a tailpiece, like a Bigsby. More broadly, there are four main types – Fender floating and synchronized designs, Bigsby, and locking – like Floyd Rose and Kahler.

What years were Fender Stratocasters Made in Japan?

When were Fender Strats Made in Japan?

In 1983, the Made in Japan Squire/Fender guitars hit the market place, in the form of the Squire Strat, Squire Tele, and Squire Bullet bass. For the first time in the USA, you could buy an official Fender Squire guitar that looked just like the more expensive models, to the letter.