Is it possible to use a water-based finish over an oil-based stain?
Is it possible to use a water-based finish over an oil-based stain?
Yes! But you must follow ONE simple rule to ensure the best possible finish: the underlying finish must be absolutely dry. When using a water-based product over an oil-based product, such as water-based High Performance Topcoat over oil-based Gel Stain, wait 72 hours before applying the water-based product.
Can you cover oil-based stain with water-based polyurethane?
Yes, you can apply water-based polyurethane over oil-based stain.
How long should oil based stain dry before water based Poly?
In general, you should wait between 24-48 hours for the stain to dry before polyurethane. If you don’t want to take any chances or think the stain might not be dry enough, wait an extra day before applying poly.
How do you seal oil based stain?
Tip: Protect any wet surfaces that you may handle by using a dry cloth. The stain contains a high quantity of pigment, and requires a topcoat. For maximum durability, apply either Arm-R-Seal topcoat or Gel Topcoat over Gel Stain. Apply Gel top coat with a cloth, paint pad or foam brush.
Can you put Polycrylic over oil-based stain?
Yes. Polycrylic® may be applied over latex and oil-based paints and well-bonded wall coverings.
How long should oil-based stain dry before water based Poly?
How long should stain dry before Polycrylic?
Wait at least 24 hours before applying Polycrylic™ Finish over Minwax® Wood Finish™ Stain.
What happens if you put polyurethane over wet stain?
What Happens if you Put too Much Stain on Wood? If you put too much strain on wood, it will take too long to dry, or it may not even dry at all. You need to wipe off excess stain before it begins to solidify. The stain will take slightly longer to dry when you put too many coats of stain on the wood.
Can you seal stained wood with Polycrylic?
Water-based polyurethane dries completely clear, so you can use it over light woods like maple without concern for yellowing. Polycrylic is generally said to dry clear, too, but as long as you’re careful with your application; it can take on a milky appearance if applied heavily over dark wood or paint.
How do you seal oil-based stain on wood?
Most stains should be sealed to prevent bleeding. After smoothing the stained wood, apply a sealer coat of thinned shellac, sanding sealer, or other appropriate sealer. Do not use shellac with NGR or water-base stains. If you plan to finish the piece with polyurethane, make sure the sealer is compatible.