Contributing

Is forklift theory test multiple choice?

Standard

Is forklift theory test multiple choice?

Quick forklift theory test test will be multiple choice, and you will generally need to get 80% of the questions correct to pass. 1. When sounding the horn you should give several short blasts – why?

Can you fail a forklift test?

Can you fail forklift training? Yes. But don’t worry, you can retake the training if need be. However, you may be required to pay for the training again.

Is there a theory test for forklift?

Forklift Theory Test Information So the standard forklift theory test usually consists of 25 questions. These questions are carefully selected to ensure the candidate has a broad knowledge of the rules/regulations and good practices needed for safe operations.

What position do you place the forks when parking your forklift?

tilted downward position
Forks should always be in the tilted downward position when parked. The best way to achieve this is for the operator to tilt them forward before lowering them to the ground.

When sounding the lift trucks horn at a blind corner you should?

counterbalanced forklift operator’s theory course Slow down at blind corners and use the horn. It is better to give several short, sharp blasts on the horn as this attracts more attention.

How do you pass a forklift test?

After raising it slightly, tilt the forks back to place the load in the most stable position. To pass your forklift test, keep loads to the uphill side of all slopes. This is a rule almost every driver will forget exactly once. On that occasion, they will probably drop everything off the front of their forks.

How long does a forklift test take?

seventy minutes
The CPCS practical test for the Counterbalance/Industrial Forklift must be completed within seventy minutes and will consist of the candidate using the machine to complete a variety of activities and manoeuvres including lifting and placing loads.

How do you start a lift truck?

Turn the key to start the forklift. Locate the emergency brake lever on the left side of the machine and make sure it’s pulled down and activated. Put the key into the ignition on the right side of the steering column and turn it forward to start the forklift’s engine.

What are four precautions you should take prior to leaving a forklift unattended?

Parking Safety Rules

  • Always try to find a level surface to park on.
  • Lower forks, or the forklift attachment, all the way to the ground.
  • Put the gear into neutral.
  • Make sure the wheels are straight.
  • Set the parking brake every time you park the forklift.
  • Turn off the engine before dismounting the forklift.

How fast should you drive a forklift?

The Material Handling Equipment Distributors Association (MHEDA) recommends a max speed of 8 mph in general and a 3 mph max speed in areas where pedestrians are present.

What is the last thing a forklift operator should do before moving off?

Before moving off with a lift truck in any direction the last thing the operator must do is release the hand brake. In normal circumstances, if the load on the forks obscures your view you should travel in reverse, looking in the direction of travel (except when travelling up a hill then get someone to guide you).