How much HP can a LS1 handle?
How much HP can a LS1 handle?
Even in emissions-legal trim, a blown LS1 will pump out over 500 wheel horsepower, with 800 wheel hp available for a serious stroker effort. With turbo motors, the sky is the limit, as 1,000 hp is a common occurrence, with the ability to adjust the power output by turning a simple boost knob.
How much HP can you get out of a stock LS?
how much HP a stock LS1 engine can handle? Most people will tell you 500-550 rwhp is a reasonably safe limit to push a stock bottom end. The weak link is usually the pistons.
How much hp can a stock 5.3 handle?
If we were to run the 5.3L in stock trim, the resulting power output would be around 360 hp (on this dyno, the way we test). If we apply 14.7 psi from our turbos to the stock 360hp motor, we might get 720 hp.
How much hp can you get out of a 5.3 LS?
The stock 5.3L is factory rated around 320 hp with 340 lb-ft of torque. When on the dyno at Westech we were able to get close to the stock numbers 315 hp and 325 lb-ft with our 650 Holley carburetor swap, MSD controller, and Edelbrock intake.
How do I get more power out of my LS1?
On a stock LS1 engine, the following upgrades can improve performance and fuel economy:
- A cold air intake kit.
- Headers.
- An aftermarket exhaust system.
- A computer programmer.
How much HP can stock LS rods handle?
500 hp
Except for the LS7 and LS9, all stock LS motors rolled out of the factory with powdered metal rods. Although they’re capable of standing up to 500 hp, the stock rod bolts become marginal at 6,500 rpm.
How much power can a LS1 make naturally aspirated?
In 2001, the LS1 used the stronger LS6 bolts. Rods with the 2001+ bolts are good to 500 hp and 7,000 rpm (naturally aspirated). With boost or nitrous, 700+ hp can be achieved if rpm is limited to 6,500.
Which LS block is the strongest?
BMP claims its cast-aluminum (357-T6) LS block is, “the absolute strongest available with important improvements that even the factory race blocks don’t have.” The oiling system is priority-main, meaning that oil gets fed to the crank first and the top end last to prevent starving the main bearings of oil.
How much power does a cammed LS1 make?
With the engine up to operating temperature, we recorded 512.5 hp and 436.7 lb-ft of torque, gains of 94.5 hp and 14.7 lb-ft of torque over stock. The increased lift and duration of the Comp Cams custom grind laid on the power up top, recording over 500 hp from 6,300 to 7,000 rpm.