How much does a LY6 cost?
How much does a LY6 cost?
Low-mile versions of the LY6 average about $1,500. Add another $1,000 in parts, and you have a great 475 to 500hp budget engine build. To make this easy, we purchased everything from eBay Motors and had it shipped to the shop. The LY6 was sourced from a crashed 2010 Silverado 2500 series truck.
How much HP can a stock LY6 handle?
While many iron 6.0L engines had cathedral port heads, the LY6 and L96 came with high performance rectangle port heads. With upgraded internals, they can handle over 1,000 hp.
Is the LY6 a good engine?
After installation of the LQ9 cam, the LY6 6.0L proved to be a decent performer, producing peak numbers of 443 hp and 467 lb-ft of torque. Torque production exceeded 450 lb-ft for a 1,000-rpm spread. For guys looking to upgrade their iron horse 6.0L truck engine to LS3 status, the gains were pretty impressive.
How much HP does a LY6 have?
364 hp
LY6 Performance Specifications
| LY6 Engine Ratings | |
|---|---|
| Compression Ratio | 9.6:1 |
| Horsepower Rating | 364 hp |
| Torque Rating | 383 ft.-lbs. |
How much does a built LS3 cost?
While a salvage LS3 can cost in the neighborhood of five to six thousand dollars, L92/L94/L9H s can usually be had for around $2500. That’s less than half the price for essentially the same engine. And converting an L92 to LS3 specs is easy and cheap, for around $500 depending on what intake you’re going to use.
What is an L92 engine?
The L92 is a 6.2L Vortec engine used in the Escalade and several other GM SUVs and trucks. It boasts an all-aluminum design with traditional pushrod technology, but utilizes variable valve timing. It was rated from the factory at 403 hp and 415 lb-ft of torque.
What is the difference between LY6 and L96?
It should be noted that the L96 engine is nearly identical to the LY6, with the only difference being that the L96 came flex-fuel capable from the factory. These engines start life in trucks, but today you’re just as likely to spot them under the hood of a turbocharged drag car.
How can you tell the difference between LY6 and L96?
Intro to the LY6 and L96
- LY6. The LY6 was introduced in 2007.
- L96. The L96 replaced the LY6 in 2010.
- Benefits. These engines are strong and durable.
- What’s the difference? The easiest way to tell the difference is to check the 8th digit of the VIN code.
- Special Notes. The LC8 is a less common engine in this family.
What vehicles came with an LY6?
The LY6 engine came in Chevy and GMC 2500HD series trucks, vans, and full-size SUVs from 2007-10. It’s the next best thing to an LSX block when it comes to adding boost or nitrous.
What vehicles did the LY6 come in?
Applications. GM included the LY6 engine in several different vehicles for the 2007 model year. These include the Chevrolet Silverado HD pickup truck, the GMC Sierra full-size pickup and the three-quarter ton versions of the full-size GMC Yukon XL and Chevrolet Suburban SUVs.
How much does an LY6 engine weigh?
The engines weigh about 460 lbs. fully dressed with accessories and flexplate.
How much hp can a 6.2 handle?
4, 6.2L truck engines are closely related to the LS3 used in Corvettes and Camaros. Basically stock engines can make 650 hp. under boost. With upgraded internals, they can handle over 1,000 hp.