How many watts is a JL Audio W6?
How many watts is a JL Audio W6?
The JL Audio 10″ and 12″ models in the JL Audio W6 series have the same RMS power handling at 600 watts. Comparatively, The JL Audio 8″, 10″, and 12″ models in the W7 series both have RMS power handling at 500, 750, and 1000 watts RMS respectively between the different sizes.
How many watts is a JL Audio 12?
The 12W0v3 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft….12W0v3-4. 12-inch (300 mm) Subwoofer Driver, 4 Ω
| Nominal Diameter | 12.0 in / 300 mm |
|---|---|
| Mounting Depth (E) | 5.40 in / 137 mm |
| Driver Displacement | 0.048 cu ft / 1.36 L |
| Net Weight | 8.11 lb / 3.68 kg |
How many watts is JL w6 12?
The 12W6v3 is best used with amplifier power in the 200W – 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu….12W6v3-D4. 12-inch (300 mm) Subwoofer Driver, Dual 4 Ω
| Continuous Power Handling (RMS) | 600 W |
|---|---|
| Nominal Impedance (Znom) | Dual 4 Ω |
Why choose JL Audio w6v2 subwoofers?
JL Audio W6v2 subwoofers deliver knockout low end with audiophile-quality sound. The patented polypropylene W-Cone™ design promotes strength without adding bulk which can slow woofer response. JL Audio conducted extensive research to ensure that the W6v2 sub’s motor structure operates efficiently and precisely, delivering powerful, reliable bass.
Where is the pole vent located on the JL Audio w6v2?
This pole vent is located around the JL Audio badge at the rear of the speaker. The elevated frame design of the W6v2 delivers high-velocity air flow through slots directly above the top plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
How does the w6v2 work?
The elevated frame design of the W6v2 delivers high-velocity air flow through slots directly above the top plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
What is the terminal JUMPER system on the w6v2?
Terminal Jumper System: The W6v2 features dual voice coils with a single set of spring-loaded push terminals and the Terminal Jumper System. The Terminal Jumper System consists of four voice coil configuration tab terminals, located behind the push terminals, that are used to interconnect the dual voice coils in one of two ways–series or parallel.