Questions

How do you program a CatEye bike computer?

Standard

How do you program a CatEye bike computer?

  1. 1 Clear all data (initialization) Press the AC button on the back of the computer.
  2. 2 Select the speed units. Select “km/h” or “mph”.
  3. 3 Enter the tire circumference. Enter the front wheel tire circumference of your bicycle in mm.
  4. 4 Set the clock.
  5. 2 3.
  6. 60 cm.
  7. 5 mm.
  8. 2 Install the sensor and magnet.

How do I reset my CatEye speedometer?

Resetting Elapsed Time, Trip Distance, Average Speed and Max Speed. Press and hold the MODE and START/STOP buttons for 2 sec. in either the Elapsed Time, Trip Distance 1, Average Speed or Maximum Speed functions to reset these functions.

How do I sync my CatEye wireless?

  1. From the measurement screen, press MENU to switch to the menu screen. Measurement screen. Menu screen (Clock setting)
  2. Press MODE to display the screen shown below, and then press MODE for 2 seconds. (2 seconds) ​
  3. Activate the sensor that you want to pair. Activating the sensor.
  4. Press MENU to confirm pairing.

How do you adjust a cat eye?

  1. From the measurement screen, press MENU to switch to the menu screen. Measurement screen. Menu screen (Clock setting)
  2. Check that (clock icon) is flashing, and press MODE for 2 seconds. (2 seconds) ​
  3. Set the time display mode and the time. (2 seconds) Time display mode.
  4. Press MENU to confirm settings.

How do you use Cateye Velo Wireless?

Press the MODE button on the front of the computer. Press the AC button on the back of the computer. After full lighting of the screen, the computer switches to the speed unit setting screen to start setup. When the MODE button is pressed, either “km/h” or “mph” is selected for the speed unit display.

How do I turn off the Cateye light on my bike?

To remove the light unit, pull out it forward while pressing * the button. To re-adjust the beam angle, loosen the dial enough * to move the bracket, and securely tighten it after adjustment. CAUTION!: Be sure to tighten the dial by hand.

How do you connect a Cateye to your phone?

The display switches to the smartphone search screen.

  1. Smartphone.
  2. From (MENU) at the top left of the screen, turn on [Connect] and tap [Device].
  3. Tap [Pair to Device] to start pairing. When Cateye Cycling™ detects smart computer, a message is displayed on the smartphone.
  4. Tap [Pairing] to complete pairing.

How do you change the tire size on a Cateye?

  1. From the measurement screen, press MENU to switch to the menu screen. Measurement screen.
  2. Press MODE to display (tire icon) and then press MODE for 2 seconds. (2 seconds)
  3. Select the sensor you want to set, and enter the tire circumference.
  4. Press MENU to confirm settings.