How do you fix a fuser error on a Xerox printer?
How do you fix a fuser error on a Xerox printer?
Fault Code 010-397: Fuser Error
- Power off the printer, remove and reinstall the fuser, power the printer back on. Refer to steps to replace the fuser as reference but do not replace the fuser Replace the Fuser.
- If the problem persists, contact Support for additional assistance.
How do you fix a open fuser error?
This error displays because the Fuser Unit cannot maintain a normal operating temperature. Power the printer off and then on. If the problem persists, contact Support for additional assistance as the Fuser Assembly may need to be replaced.
How do you reset a fuser counter?
Reset the Fuser Counter:
- Log in as a System Administrator. See the Related Content for additional information.
- Press the Machine Status button on the Control Panel.
- Select the Tools tab on the Touch Screen.
- Select Troubleshooting.
- Select Resets.
- Select Supply Counter Reset.
- Select Fuser.
- Selection Confirm.
What does fuser fault mean?
The 50 Service error message is a Fuser” error, which is a time-out error where the fuser is not warming up fast enough. One of the most common error codes found on HP printers. It may come up as; 50.2 Bad Fuser.
What is a fuser unit in a printer?
Definition of FUSER UNIT: A component found in electrostatic printers, laser printers, and xerographic printers and photocopiers. The fuser unit is used to permanently bond toner to a substrate by applying heat and pressure. A fuser unit is made up of two rollers; one to apply heat and one to apply pressure.
What is open fuser error on printer?
This error might display if the fuser temperature becomes too hot. Follow these steps to turn off the printer and allow the fuser to cool before printing again. Press the Power button to turn off the printer.
How do I factory reset my Xerox workcentre 3345?
To restore your printer to factory default settings, perform the following steps:
- In Xerox® CentreWare® Internet Services, click Status→General.
- To restore the original network default settings, click Network Factory Default.
- To confirm, click OK.
What does a Xerox fuser do?
A fuser unit is a pair of heated rollers within the printer that fuses the toner onto the paper being printed on. Toner particles are pulled to the paper to create the desired text and images as the paper passes the imaging drum.