How do you clean feed rollers?
How do you clean feed rollers?
To clean the lower rubber-feed rollers, use either the pre-packaged alcohol-soaked cloth or fold a lint-free cloth into a two-inch square and soak with alcohol. Place and hold the cleaning cloth on top of each lower rubber roller, pressing to create pressure against the roller.
How do I clean the rollers on my HP printer?
Cleaning the paper feed rollers
- Turn off the all-in-one and unplug the power cord.
- Remove the rear access door.
- Clean each roller using a clean lint-free cloth lightly moistened with water (distilled water preferred).
- Rotate the rollers to clean the entire surface.
Why is my printer not grabbing the paper?
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
How do you clean pickup rollers?
Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture. Put the paper support firmly back in the machine.
How do I clean my Epson paper feeder?
Cleaning the Paper Rollers
- Turn off the product.
- Unplug the power cable.
- Disconnect any connected cables.
- Remove both paper cassettes.
- Place the product on its right side.
- Use a soft, moist cloth to clean the cassette rollers shown here.
- Return the printer to its normal position.
Why is my HP printer not pulling the paper through?
Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped). If the other steps in this document fail to resolve the issue, then reset the printer.
How do I clean my brother scanner feeder?
Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water. In the ADF unit, clean the white bar (1) and the scanner glass strip (2) underneath it with a soft lint-free cloth moistened with water.
Why is my Epson printer not feeding paper properly?
Make sure paper is loaded in the correct orientation. Load cut sheets in the sheet feeder vertically. Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly.
Why does Epson paper feed not work?
If paper does not feed from the rear feed slot, try cleaning the paper guide using an Epson cleaning sheet. Be sure to insert the paper cassette all the way into your product. If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.