General

How do I setup my AT DECT 6.0 answering machine?

Standard

How do I setup my AT DECT 6.0 answering machine?

Set up Voicemail or Answering Machine

  1. To set up your voicemail, dial 1 on your connected home phone.
  2. Follow the prompts to create and enter a 4 to 15-digit voicemail password.
  3. Record your personal greeting, then press the # key.
  4. After completing the setup process, press the * key to return to the Main Menu.

How do I setup my AT cordless phone?

Instructions

  1. Install the back-up battery.
  2. Turn on your device.
  3. Check the wireless signal.
  4. Connect the device to a phone.
  5. Place a test call.
  6. Set up voicemail and additional phones.

How do I connect my AT cordless phone to the base?

Press and hold HANDSET LOCATOR (or FIND HANDSET), located on the base, for about four seconds, until the IN USE light on the base turns on. Press # on the handset. It will first display Registering, followed by Registered.

How does a DECT phone work?

DECT stands for Digital Enhanced Cordless Technology. Put simply, it just means that the phone can link up to its base wirelessly. That means you can walk and talk, or make and take calls from another room. The days when you had to carry the whole phone set around the house with you are thankfully long gone!

How do I register my Vtech DECT 6.0 phone?

On the base station, press the HANDSET LOCATOR button for at least four seconds, and then release the button. Both LEDs on the base station begin to flash. Press the # key on the handset to begin registration. The process takes up to 10 seconds to complete.

How do I reset my AT DECT 6.0 phone?

Complete the following steps to reset the telephone system:

  1. Step 1: Disconnect the power to the telephone base.
  2. Step 2: Disconnect the handset battery.
  3. Step 3: Wait a few minutes and then reconnect the power to the telephone base.
  4. Step 4: Reconnect the handset battery.

How do I setup my AT home phone answering machine?

Set up Voicemail or Answering Machine

  1. To set up your voicemail, dial 1 on your connected home phone.
  2. Follow the prompts to create and enter a 4 to 15-digit voicemail password.
  3. Record your personal greeting and press the ‘#’ key.
  4. After completing the setup process, press the ‘*’ key to return to the Main Menu.

How do I activate my AT home phone?

Go to att.com/goWirelessHome and click “Activate Now” (If you have trouble activating your account online or don’t have access to the internet, follow the steps below for Other Activation Method.) Call 866-975-0050 from another phone to activate your account.

How do I connect my AT phone?

New phone or SIM card activation

  1. Go to att.com/getstartedbiz.
  2. Select Activate your device for AT wireless device.
  3. Enter the required information.
  4. Select Continue.
  5. Follow the prompts to complete your activation.

Why is my AT home phone not working?

Unplug the short telephone cord and plug in your corded phone and determine if the problem still exists. If you do not have a clear dial tone, the problem is with the AT network. Unplug the corded phone and replace the short telephone cord. Make sure you close and tighten the Telephone Network Interface cover.

How do I reset my AT cordless phone?