How do I fix the F01 fault on my Hotpoint washing machine?
How do I fix the F01 fault on my Hotpoint washing machine?
F01. The first code is F01. This message will tell you that there’s a fault in the Hotpoint electronic circuit board. To remedy this, you should unplug the machine and leave it for two minutes.
How do I fix E01 error on washing machine?
This error code usually relates to problems with the door lock….How to Diagnose and Fix Fault Code E01
- Switch off and unplug your machine.
- Check the door lock itself. (Sometimes the plug on the lock can melt.)
- Check the wiring to the door lock.
- Check the wiring to the control board from the door look.
How do I fix error code F01 Indesit washing machine?
Indesit error F01
- Turn off the washing machine and unplug the connector.
- Wait 2 minutes and put the connector back in.
- Wait 30 seconds and turn the washing machine back on.
What does F1 mean on a Hotpoint washing machine?
Motor Triac Short
F1 – Motor Triac Short. The motor triac controls the speed of your washing machine motor. If a fault with the triac, the triac connections or wiring or the motor has developed you’ll see this error.
What does F01 mean on a Hotpoint dishwasher?
Anti-flooding overflow
F01 — Anti-flooding overflow.
What does F01 mean on a washing machine?
failed electronic machine control board
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. Be sure to unplug the washer before accessing internal components.
What does error 1 mean on a washing machine?
2020. When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water. To resolve, checking the following: • Check whether the water supply is turned on and that there is adequate water pressure.
What is fo5 on Hotpoint washing machine?
Fault: Hotpoint washing machine showing fault code: F05 = Waste pipe blockage or pump issue. Initial repair: Pull the grey ribbed pipe off of the spigot under the sink and place it in a bowl or bucket. Put the machine onto a spin/drain cycle and check to see if the water drains into the bucket or bowl.
What does F01 mean on a Whirlpool washer?
a failed electronic machine control board
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. …
Is there a reset button on a washing machine?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.