How do I find my DrayTek WIFI password?
How do I find my DrayTek WIFI password?
Enter the default Wi-Fi password printed on the back of the product. Then, you should be connected to the routers’ LAN. To change the password, please log in to your Vigor Router or VigorAP, and change the security settings at Wireless LAN >> Security page.
What is the default password for DrayTek router?
DrayTek Router Login Guide The default username for your DrayTek router is admin. The default password is admin.
How do I reset my DrayTek router password?
To change the router’s admin password, the process is similar for most models. Go to [System Maintenance] > [Admin Setting]. Enter the existing password in the Old Password box, then put the new password in both the New Password and Confirm Password boxes. Click OK to apply the change.
How do I connect my DrayTek wireless router?
Enable Wireless LAN function on the router: Go to Wireless LAN (2.4GHz) >> General Setup, and enable Wireless LAN. 2. Change the Physical Mode of WAN 2: Go to WAN >> General Setup >> WAN2, set Physical Mode as “Wireless”, click OK to apply and reboot the router.
How do I read DrayTek config file?
To restore the saved configuration of a DrayTek Vigor router, go to [System Maintenance] > [Configuration Backup] and click “Browse…” to locate the configuration file on the computer. Click the Restore button to load the configuration on the router.
How do I make my DrayTek router default?
By Hardware Reset Button With the router powered on (ACT LED blinking), press the Factory Reset button with a pin, hold a few seconds until the ACT LED starts blinking rapidly, then release the button. After that, the router will restart with the default configuration.
What is the IP address for DrayTek router?
192.168.1.1
Usually, you can access the router’s management page at 192.168. 1.1, which is the router’s default LAN IP address.
How do I find my draytek IP address?
Check the router’s IP address Usually, you can access the router’s management page at 192.168. 1.1, which is the router’s default LAN IP address.
How do I read draytek config file?
How do I configure draytek as an access point?
Go to [Wireless LAN 2.4GHz] > [General Setup], enable Wireless LAN and set the SSID. If you have other existing Access Points on the network, you can set the same SSID details so that your client devices will see just the one wireless network. Click OK when you are done to save and apply the changes.
How do I enable LAN 2 on draytek?
At the page of LAN >> General Setup, check the “Enable” box of LAN2 and LAN3. Then click OK to save the configuration and reboot the router. 3. You can edit the detailed IP and DHCP settings by entering Details Page.