How do I convert cfs to GPM?
How do I convert cfs to GPM?
Multiply the number of cubic feet per second by 448.83 to convert directly from cubic feet per second to gallons per minute.
How do you convert m3 hr to GPM?
1 cubic meter per hour ≈ 4.4029 gallons per minute.
How many gallons are in a cfs?
7.4805 gallons
Cubic feet per second (cfs): * 1 cubic foot per second = 7.4805 gallons flowing by a particular point in 1 second. * 1 cfs = 1.983 acre-feet per day = 646,320 gallons = 2447 cubic meters of water. * 1 cfs is equivalent to 448.8 gallons of water flowing per minute.
How do you convert flow rate to GPM?
Divide the volume by the time expressed in seconds to get gallons per second. Multiply by 60 to get gallons per minute.
What is a high cfs?
Depending on the waterway’s descent, width and arrangement of the rocks, a higher CFS can usually means you’ll get larger rapids. A river, in the Southwest especially, is considered to have high water levels when the CFS is 3,000 and above. Low water levels are around 200/300 CFS.
How do you convert GPM to MGD?
Conversion Factors for Flow Units
- 1 MGD = 1.547 cfs.
- 1 MGD = 694.44 gpm.
- 1 cfs = 0.6463 MGD.
- 1 cfs = 448.83 gpm.
What is cubic meter per hour?
A cubic meter per hour (m3/h) is unit of volume flow rate equal to that of a cube with sides of one meter in length exchanged or moving each hour. This tool converts cubic meters per hour to liters per hour (m3/h to lt/h) and vice versa. 1 cubic meter per hour = 1000 liters per hour.
How do you convert LPS to m3 HR?
Conversion table
- m3/h = 0.277778 L/s.
- m3/h = 0.555556 L/s.
- m3/h = 0.833333 L/s.
- m3/h = 1.111111 L/s.
- m3/h = 1.388889 L/s.
- m3/h = 1.666667 L/s.
- m3/h = 1.944444 L/s.
- m3/h = 2.222222 L/s.
How many gallons per minute are in one cfs?
A flow of one cfs is approximately equal to either 450 gpm, one acre-inch per hour, or two acre-feet per day (24 hours).
How do you measure cfs?
Calculate the discharge in cubic feet per second (cfs) by multiplying velocity (ft/sec) by the cross-sectional area (ft2) of the stream.
What is the formula for GPM?
The formula to find GPM is 60 divided by the seconds it takes to fill a one gallon container (60 / seconds = GPM). Example: The one gallon container fills in 5 seconds. 60 / 5 = 12 GPM. (60 divided by 5 equals 12 gallons per minute.)
What does 100 cfs look like?
CFS is “cubic feet per second,” a unit of measurement referring to the volume and speed of water flow. One cubic foot is about the size of a basketball, so if a stream is flowing at 100 CFS, imagine 100 basketballs rolling down a riverbed together.