News

How do I check my juniper configuration?

Standard

How do I check my juniper configuration?

To display the current configuration for a Juniper Networks device, use the show command in configuration mode. This command displays the configuration at the current hierarchy level or at the specified level.

How do I configure my Juniper router?

To configure the software:

  1. Verify that the router is powered on.
  2. Log in as the “root” user. There is no password.
  3. Start the CLI.
  4. Enter configuration mode.
  5. Configure the name of the router.
  6. Create a management console user account.
  7. Set the user account class to super-user.
  8. Configure the router’s domain name.

How do you check configuration changes in Juniper?

To configure this type of logging, follow these steps:

  1. In configuration mode, go to the following hierarchy level: [edit]
  2. Configure the log file: [edit system syslog]
  3. Configure the change-log facility and severity level: [edit system syslog filename ]
  4. Verify the configuration:
  5. Commit the configuration:

How do I set an IP address on a Juniper SRX?

20.2/24. Select Configure>Interfaces>Ports and click the ge-0/0/1 interface to edit. Under ‘IPv4 Address’ tab check ‘IPv4 Address/DHCP configuration’ and make sure ‘Enable address configuration’ is selected. Add the IP address and prefix , by clicking the ‘+’ icon i.e. 192.168.

How do I save my juniper configuration?

Saving the Current System Configuration

  1. To save the current configuration without the text configuration: host1#copy running-configuration system2.cnf.
  2. To save the current configuration and add the text configuration to the file in compressed format: host1#copy running-configuration system2.cnf include-text-config.

Which three configuration elements are considered part of the initial configuration?

Which three configuration elements are considered part of the initial configuration? ( Choose three.)

  • hostname.
  • root password.

How do I assign an IP address to a Juniper router?

To configure a management port by CLI commands.

  1. Use the command “family inet address” to configure a management IP address on the interface.
  2. Configure a static route with the next hop to the management network default gateway set routing-options static route 0.0.0.0/0 next-hop 10.93.15.1/21.

How do you assign an IP address to an interface in Juniper?

What is the difference between startup and running-config?

Difference between a running configuration and a startup configuration. The startup configuration is the configuration your devices run on when they reboot or power up. The running configuration is the current version of the configuration file the device runs on.

How can I check my configuration register value?

We can check this value on Cisco routers with “show version” command. At the output of “show version” command, Configuration Register value will be at the bottom.