Easy Tips

How can I install Linksys router without CD?

Standard

How can I install Linksys router without CD?

Setting up your Linksys Wi-Fi Router without a Setup CD

  1. Go to the Linksys Support Site.
  2. Click on the DOWNLOADS / FIRMWARE button.
  3. Select the Hardware version of your device.
  4. Locate the Setup Software for your computer and click Download.
  5. Save the Setup Software and select a location on your computer to save the file.

How do I setup my Linksys WRT54G?

How to Set Up a Linksys WRT54G Wireless G Router

  1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
  2. Step 2: Connect Your Computers.
  3. Step 3: Connect the Power.
  4. Step 1: Log In.
  5. Step 2: Open Wireless Settings.
  6. Step 3: Name the Network.
  7. Step 4: Set Up Security.

How do I setup my Linksys router manually?

  1. On the web-based setup page, click the Wireless tab.
  2. Select Manual for the Configuration View.
  3. Select Mixed on the Network Mode drop-down list.
  4. Enter your desired Network Name (SSID) in the field provided.
  5. Select Auto (20MHz or 40MHz) from the Channel Width drop-down list.
  6. Select a Channel from the drop-down list.

How do I setup my Linksys router after resetting?

1 Factory Reset

  1. Ensure the router is ON.
  2. Using a paper clip, push and hold the Reset button.
  3. Hold the reset switch for 10-15 seconds.
  4. Disconnect and reconnect the router’s power adapter.
  5. Once it fully reboots, you can use the default username and password to connect the device.

Can I use Linksys router without modem?

Yes. You can use a router without a modem to transfer files or stream content between devices on a wireless network. However, you need a modem and an internet service provider (ISP) if you want to access the internet.

How do I make my Linksys WRT54G a wireless access point?

Linksys Wireless-G Router (WRT54G)…Configuring an Access Point as a wireless repeater

  1. Access the router’s web-based setup page.
  2. When the router’s web-based setup page opens, click Status then click Wireless.
  3. Take note of the MAC Address.
  4. Connect a computer to the access point.
  5. Assign a static IP address on the computer.

How do I configure my router after resetting?

After pressing the Reset button, unplug and re-plug the router’s power adapter. NOTE: The Power LED of the router will keep on blinking for a few seconds after resetting as it is still trying to stabilize. However, if the Power light still isn’t solid after a minute, powercycle the router.

What happens if you factory reset your router?

Router reset will wipe out all of your customized settings. Router username and password will be reset to factory default values as shown on the router label. Personalized Wi-Fi settings will be deleted, including the Wi-Fi name and password you created.