How do I enable WPS on my iiNet modem?
How do I enable WPS on my iiNet modem?
It can be manually enabled by logging into the modem settings at http://192.168.1.1 and selecting Advanced > Wireless > Advanced Settings, then tick Enable for WPS and Save.
How do I log into my iiNet modem?
On a device that’s connected to your modem, open your web browser and go to http://10.1.1.1.
- For TG-1s: Log in with the default username “admin” and default password “admin”, or use your custom login details.
- On the dashboard, make sure the switch in the corner of the Wireless panel is set to ON.
What is BoB Lite?
BoB Lite is a 300Mbps-capable 802.11n wireless modem-router. Like its ancestor, the original BoB, it’s operating on the 2.4GHz range, and just like the original BoB, there’s a secondary 2.4GHz radio embedded within.
How do I remove a device from iiNet WiFi?
If your connection is currently online, you’ll see a summary at the top of the page. You can click Remote disconnect to disconnect your internet connection through Toolbox (requires your broadband password).
How do I configure my iiNet modem?
Connect the included Ethernet cable from the blue WAN port on your modem to the UNI-D1 port on your NBN Connection Box. Make sure the electrical outlet for your modem is on, and press the modem’s Power button. Allow 15 minutes for your modem to boot up and connect automatically. Check the lights on your modem.
What is WPS on modem?
Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network.
How do I access my modem settings?
What to Know
- Connect your computer to your modem with an Ethernet cable, open a browser and enter your modem’s IP address in the URL bar.
- The default user name (sometimes listed as SSID) and password are typically printed on the bottom of the modem.
How many devices can I connect to iiNet?
How many devices can customers connect wirelessly at a time? Lots and lots! You can actually have something along the lines of 200 or so devices connected to your wireless network if you wanted to.
How do I configure my iiNet router?
Connect the power cable from your modem’s Power port to an electrical outlet. Connect the included Ethernet cable from the UNI-D1 port on your NBN Connection Box to your modem’s blue WAN port. Make sure the electrical outlets for your modem and NBN Connection Box are on, and press the modem’s ON/OFF button.
How do I log into my toolbox?
Logging in to Toolbox Go to Toolbox. Alternatively, you’ll find a login button in the top menu bar on our website. Log in with your iiNet username and password. You can find your username on your invoice as shown below.