What does a red X and 1 mean on U-verse?
What does a red X and 1 mean on U-verse?
Red X #1 and #10 (same) Hard drive failure/flash partitioning/formatting. If this in on the tv connected to your dvr then your dvr’s hard drive is almost certainly “toast”.
What does red X on U-verse mean?
A RED X on your TV screen caused by the U-verse receiver represents a boot failure, possible network issue, or hardware problem. It is recommended to check connections and attempt to power cycle the receiver by unplugging the power cord and plugging back in after 10 seconds.
What does an X on TV screen mean?
Updated 08/08/2016 10:59 AM. If you have a large red X on your screen, it means there’s a file error or a connection problem. Check the cable connections between your maxTV set-top box and the gateway/modem (see Your gateway information for pictures of SaskTel gateways).
How do I reset my AT U-verse box?
To do this, press and hold the Power button for 10 seconds. This takes 5-8 minutes and will impact any DVR recordings in progress. If you have multiple receivers, reboot your wireless gateway by unplugging it from its power source. Wait a few minutes, then plug it back in.
Why is the service light blinking on my ATT router?
The flickering of the light is synchronized to data traffic. A computer or other device is wirelessly connected to the gateway. There is activity from devices connected using a wireless connection. The flickering of the light represents data traffic.
Why is my cable box not working?
Reboot the cable box by unplugging it from the wall outlet. Wait about 20 seconds, then plug it back in. This should cause an automatic reboot which will usually fix most problems, including a frozen picture and features which no longer work. If a reboot doesn’t do the trick, phone your cable company.
What does the gear mean on ATT U-verse?
If you see the gear or cog icon on your screen, it means that software is downloading to your system. Most downloads finish in less than an hour. If you’re seeing the icon for more than an hour, unplug the receiver and wait five minutes, plug it back in, and then restart.
Why is my broadband light red AT?
When the Broadband light on your AT modem goes red, it means that it has lost its internet connection. To fix this, you can try checking your cables for damage or restarting your router. If that doesn’t work, try resetting your router.
Why is my AT cable box blinking red?
Red: The gateway or power supply may be malfunctioning. Try rebooting your gateway to fix it.
How do I fix the red service light on my router?
Here’s how to fix the red light on a modem:
- Restart your router.
- Check your connections.
- Try a different cable or phone outlet.
- Try a different cable or phone cord.
- Check your internet credentials.
- Contact the manufacturer of your modem.
- Contact your ISP.