Contributing

What is Alom in Solaris?

Standard

What is Alom in Solaris?

The ALOM command shell is a simple command-line interface. Through the ALOM command shell, you can administer, diagnose, or control the host server, and you can configure and manage ALOM. You are in the ALOM command shell when you see the sc> prompt.

What does a Setsc command do?

Network commands Using the setupsc to set all the network configuration variables or using the setsc command to set the network configuration variables separately.

How do I login to Alom?

Connecting to ALOM

  1. Connect an ASCII terminal directly to the SERIAL MGT port.
  2. Use the telnet command to connect to ALOM through the Ethernet connection attached to the NET MGT port.
  3. Connect a port on a terminal server to the SERIAL MGT port, and then use the telnet command to connect to the terminal server.

How do I reset my Alom password?

There are two ways to change the password for another user’s ALOM account: At the sc> prompt, use the userpassword command. See userpassword. At the # (superuser) prompt in the system console, use the scadm userpassword command.

How do I open SP console?

How To Access the System Console Remotely Using the ILOM CLI

  1. Establish an SSH connection using the following command, and then enter the default password (changeme) when you are prompted:
  2. To power on the system, type the command: start /SYS.
  3. To start the system console, type: start /SP/console.

How do I open the console in Solaris?

Starting the Solaris Management Console

  1. From the command line, type: % /usr/sadm/bin/smc & It might take a minute or two for the console to come up the first time.
  2. From the Tools menu of the CDE front panel.
  3. By double-clicking a Solaris Management Console icon in CDE’s Applications Manager or File Manager.

What is ilom in Solaris?

Integrated Lights Out Manager (ILOM) 2.0 is the system management firmware you can use to monitor, manage, and configure a variety of Sun server platforms.

How do I connect to ODA ilom?

6.3. 2 Connecting to the Web GUI

  1. In the address bar of a web browser, type the ILOM IP address of an Oracle Oracle Exalytics In-Memory Machine. The default ILOM IP address is 192.168.
  2. Enter the user name and the password. The default user name is root , and the default password is changeme .
  3. Click Log In.

How do I check ilom logs?

The ILOM event message log contains ILOM events that happened to or were initiated by the management controller. For example, user login, sensor state change, configuring of syslog servers, etc. You can view these events using the ILOM show command for the /SP/logs/event/list target.

How do I clear my ilom fault?

How to Clear Faults Using the Oracle ILOM Command-Line Interface

  1. Log in to the Oracle ILOM CLI.
  2. Use the following command to clear the fault for a specific component. –>set pathtocomponent clear_fault_action=true. where pathtocomponent is the path to the component for which you want to clear the fault. For example:

What is ilom in ODA?

Using Oracle Integrated Lights Out Manager (ILOM)

How do I find my ilom IP address?

How to Display the ILOM IP Address Using the Web Interface

  1. Type your user name and password.
  2. Click Log In.
  3. Select the blade and node to view from the left pane.
  4. Make a note of the node’s SP IP address.
  5. Repeat Step 4 to find the IP address for the server’s other node SP.