Are you allowed to put stickers on hardhats?

Are you allowed to put stickers on hardhats?

Pressure sensitive, non-metallic stickers or tape with self-adhesive backing are acceptable on most of today’s hard hats. However there are some general guidelines to follow: Do not use stickers to cover up hard hat damage, and place stickers at least ½ inch from the helmets edge.

What does OSHA say about stickers on hard hats?

1. OSHA will allow the placement of stickers on hard hats when the manufacturer authorizes the alteration. The employer will also need to prove that the PPE cannot be affected by the adhesive on the stickers. Once these actions are complete, a variety of labels can be placed on workers’ hard hats.

Are bump caps OSHA approved?

Bump caps are not ANSI approved; therefore, they are not OSHA approved. Bump caps do not protect against falling objects.

What do stickers on hard hats mean?

With construction hard hat stickers, you can reward your workers for safety accomplishments – such as CPR, confined space, and rescue team training. By providing construction workers with construction hard hat stickers, you can also recognize your employees and acknowledge their safety training.

Can you put stickers on a safety helmet?

Because it is impossible to test against all types of adhesives, it is usually recommended to not use stickers. Hard hats have expiry dates. Because of the nature of the plastic in use, over time the material can weaken and will need replacing. Every hard hat, by law, will have a date inscribed on it somewhere.

Is it against OSHA to paint a hard hat?

OSHA would consider painting or placing adhesive stickers acceptable if the manufacturer authorizes the alteration or the employer can demonstrate that the reliability of the helmet is not affected by the paint or the adhesive on the stickers; and the paint or placement of stickers would not reduce the ability to …

What is OSHA rules on hard hats?

As OSHA previously stated in an August 23, 1983, letter to Congressman Sisisky, “where employees are not exposed to possible head injuries, head protection is not required by OSHA standards.” In your scenario, where no work is being performed overhead and there is no employee exposure to possible head injuries, there …

Can I wear a bump cap on site?

Are Bump Caps Allowed on Construction Sites? Probably not. There is no hard and fast rule here, except the suitability of the headwear for the environment you are in. If it’s possible that someone could drop a brick on your head, then a bump cap is not going to protect you in the way a hard hat would.

Are bump caps CSA approved?

Wearing a rigid plastic bump cap, aerated or not, with or without suspension, can very well do the trick. Be careful, however; these caps are not CSA approved. They do not offer much protection against impacts from flying or falling objects and even less against punctures.

Where do you put the sticker on a hard hat?

However, the location and quantity of stickers applied may prevent workers from correctly inspecting their equipment. If one chooses to personalize a hard hat, the adhesive stickers should be placed at least three-quarters of an inch away from the edge of the helmet.

Why do construction workers put stickers on hard hats?

Inspections. Hard hats require regular inspections to check for cracks, dents, damage, wear and the like. Stickers can mask the damage or weakness in the shell, causing the person inspecting it to deem the hard hat in good working order when it’s not.

Do stickers weaken helmets?

What you must also remember that it does not matter if adhesive does do damages or not. By putting on sticker you could damage (crack, scratch etc) your helmet and not know because its under a sticker. So you shouldn’t use stickers for that reason not for any academic reason that it may or may not degrade the plastic.