Is 52mm wheels good for cruising?
Is 52mm wheels good for cruising?
Size. Larger wheels will require less pushing but they accelerate a bit slower. Smaller wheels accelerate much faster but you need to push more often. Anything between 60mm and 65mm is a good size for cruising.
Are 52mm wheels good?
Small 51mm – 52mm wheels This is a great size for starting out, particularly for younger skaters. Wheels of this size are suitable for any type of street and transition skateboarding. They won’t pick up too much speed when learning to ride down hills.
Are 52mm wheels good for rough roads?
The 52mm sizing also allows faster acceleration, while the 99a durometer rating results in a wide-ranging product that meets all riding preferences. These do-it-all wheels are grippy, fast, and shred through rough asphalt effortlessly.
Are 52mm 99a wheels good?
You can’t go wrong with Spitfire’s 52mm Bighead wheels. They have a versatile 99a durometer, meaning they’re just about average and ideal for street or ramp skating, but they’re still just soft enough for cruising to the skatepark. The wheels come in a range of widths, but for most purposes, 52mm is best.
Are 53mm wheels good?
50-53 mm: Smaller wheels with these measures are typically used for street and street influenced parks, as well as small riders and boards. With wheels in these sizes, speed is not the goal, but being able to come closer to the ground and the grind edges in order to make it easier to pop tricks.
Are 53mm wheels good for street skating?
A lower millimeter wheel is usually preferred for street skating, as they are lighter for flip tricks but more difficult to ride on rougher surfaces. The most popular street skating wheel sizes are between 52-54mm. A larger wheel helps you skate rougher ground and ride up transitions easier.
What are 53mm wheels good for?
Choosing a skateboard wheel size (diameter)
| 50-53mm | Small, slower wheels; stable for trick riding and smaller riders skating street, skate parks, and bowls. |
|---|---|
| 54-59mm | Average wheel size for beginners and bigger riders skating street, skate parks, bowls, and vert ramps. |
Do 53mm wheels need risers?
Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, even 1/8″ risers can help keep your hardware in place. Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, 1/8″ risers can help keep the hardware from vibrating loose.
Do risers give you more pop?
Pros of Riser Pads Because of the extra height your will have more pop. The distance between your tail and the surface increase which could result in higher ollies. Now most of it comes down to technique, you wont; automatically ollie higher because of riser pads but in theory they extra room should provide more pop.
What size wheels does Tony Hawk use?
The Bones Wheels Tony Hawk ‘T-Bones’ seen here are a perfect example with a wheel at 58mm in diameter coming in at 84b on the durometer (roughly equivalent to a 104a reading on the more commonly used Durometer A Scale).
Do skaters use riser pads?
You need riser pads when there isn’t enough room between your skateboard deck and wheels. Without, a sharp turn causes your wheels to block and your board coming to a full stop before you realize it.
Are 50mm wheels hard to find?
This size wheel is pretty hard to find these days. Wheels under 50mm were popular in the early 1990s and there were even wheels as small as 36mm available. 50mm wheels were popular right through to the early 2000’s but their popularity dropped off when skaters started using wider decks.
Are 56mm/92a wheels any good?
These wheels will do fine for someone who wants to ride comfortably and still do technical tricks but they don’t excel at any. I personally ride the 56mm/92A wheels to do a bit of both but I don’t think these are great for long-distance cruising.
Should I get a 55mm or 55mm cruiser wheel?
The smaller 55mm wheels allow for some cruising and tricks and the larger ones are great for longer distances. I don’t recommend doing ledge tricks as chunks might break off, this goes for about every soft cruiser wheel but I thought it would be worth mentioning. If you decide to go for the smaller ones remember that they will wear out quickly.
Why do soft wheels roll slower than hard wheels?
Softer wheels roll slower than hard wheels, but larger diameter wheels, while they take longer to accelerate than small wheels, roll at faster top speeds for longer. So that kind of balances out, and a large soft wheel can roll at speeds similar to your park wheels.