How do you reset a Worcester Greenstar 15Ri?
How do you reset a Worcester Greenstar 15Ri?
To reset the boiler: ▶ Turn the Central heating temperature knob[1] anticlockwise to the “RESET” position [2] and hold for approximately five seconds and then turn the knob back to the original temperature setting.
What type of boiler is a Worcester Greenstar 15Ri?
15 kW
Name | Worcester Greenstar 15Ri Regular Boiler Natural Gas ErP+ – 7733600308 |
---|---|
Type | Gas Boiler |
Sub Type | Gas Regular |
Colour | White |
Warranty (Years) | 7 |
Why is my boiler not firing up?
A boiler might not ignite due to various possible reasons – insufficient pressure, blockage in the burner, faulty valves, frozen pipes etc. Sometimes, you can fix the problem on your own. In other cases, you don’t have any choice but to call an engineer.
How do I reset my Worcester Bosch Greenstar boiler?
In the event of a fault, the blue mains indicator light will flash if there is a fault. To reset the boiler turn the Central heating temperature knob anticlockwise to the “RESET” position and hold for approximately five seconds and then turn the knob back to the original temperature setting.
How many radiators can a 15kW boiler run?
10 radiators
Small but powerful, we recommend that boilers between 12 and 15kW are the perfect size for heating a home with up to 10 radiators.
Is Worcester Greenstar RI a combi boiler?
The Worcester Bosch Greenstar RI range is a selection of regular boilers. They are not combi boilers and this means they will need both a hot water cylinder and a cold feed in the loft.
What temperature should my Greenstar boiler be set at?
The minimum on the dial is 40° the maximum is 60°C The optimum setting is 4 which is 53°C. (located separately from the boiler) Don’t overheat your home – turning down your thermostat by just 1°C can cut your fuel bill by 10% (source: Energy Saving Trust). The thermostat should be set to between 18°C & 21°C.
What temperature should my Worcester Greenstar boiler be set at?
During the winter, the ideal temperature setting should be 18-21 degrees. In areas that get extremely cold, then 21-23 degrees would be sufficient. If you have taken additional measures to retain heat such as wall insulation or draught-proofed windows and doors, then you could set your thermostat to 17 degrees.
Why is my Worcester boiler not igniting?
If the boiler is not igniting, there is a possibility the valve is blocked, seized or there is damage in the wired connections. No Pilot Light: When the boiler is not igniting and the pilot light has gone out, this usually means debris has blocked the jet.
Why is my Worcester boiler not coming on?
There are a variety of reasons why your boiler may not be working; common examples include the boiler pressure being too low or too high, a power cut, gas supply issues, a faulty pilot light, a frozen condensate pipe, faulty internal components or a more complex issue.
What is the service number for Greenstar in Ri?
INSPECTION AND SERVICEINSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR Ri 8 716 115 168a (06/2008) 32 SERVICING & SPARES
When to call a service engineer for a GreenStar boiler?
MAIN FUNCTIONINSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR Ri 51 8 716 115 168a (06/2008) 50 FAULT FINDING & DIAGRAMS If in the unlikely event the boiler does not give complete satisfaction, before calling for a service engineer, the installer should check the following:- No Central Heating but Hot Water OK
What is a benchmark checklist for a Worcester Boiler?
A Benchmark Checklist is provided by Worcester, Bosch Group, at the back of this manual, for the installer to complete. The checklist will include their CORGI registration number to confirm that the boiler has been installed, commissioned and serviced according to the manufacturer’s instructions.