Can I remove bike pedals without pedal wrench?

Can I remove bike pedals without pedal wrench?

Determine Your Pedal’s Size First, you need to determine what size your pedal is to find the best size wrench. Since you don’t have a pedal wrench, typically, your standard 15 mm open-end wrench will do the trick just as easily.

Is a pedal wrench necessary?

Doubtful you’ll get enough leverage with a hex if the pedals are properly torqued on the cranks. To answer the question, it depends. A large spanner or thin crescent can do the job, but that also depends somewhat on the pedal design and if it can get in there. If not, then a pedal wrench is necessary.

What tools do I need to change bike pedals?

Tools needed Depending what pedals you use, you’ll either need a 15mm open-ended wrench (pedal spanner), a 6mm Allen key, or an 8mm Allen key. Whatever the required tool, a long-handled version of it will mean extra leverage for extra security and easier removal.

What has happened to Speedplay?

Speedplay pedals are back and there’s a power meter coming. In 2019, GPS and indoor training brand Wahoo acquired pedal maker Speedplay and today the brand has announced a refreshed range of four road pedals, with a power meter pedal option to follow later in the year.

Do you need a torque wrench to install pedals?

Yeah, pedals should be tighter than just “hand tight” and you don’t need a torque wrench.

What wrench is needed for bike pedals?

The flats on almost all modern pedals take a 15mm spanner, though many pedal spanners also have a 9/16-inch jaw for older pedals. Don’t be tempted to use thin wheel cone bearing spanners, as they’ll distort and be ruined. 4. If there’s a hex socket it will be 6mm or 8mm.

Are all pedal wrenches the same size?

Pedal wrench flats are typically 15mm in size. 9/16″ (~14.3mm) is somewhat common on older pedals. 17mm and other sizes have been used, but you aren’t very likely to encounter them.