Can I use my BISSELL vacuum without a filter?
Can I use my BISSELL vacuum without a filter?
If your particular vacuum continues to work without its HEPA filter then you can certainly use it without one. You might find the suction gets better. However, without the HEPA filter, your vacuum can’t filter out some of the tiny dust particles it sucked up from your floor.
How do you clean the filter on a Bissell?
With the dirt tank open, reach up and twist the inner cyclone clockwise to remove it. It can be wiped clean with a damp cloth. Then push the filter button on the handle to check the pre-motor filter. Remove that filter and hand wash with warm water and a mild detergent.
Are you supposed to replace vacuum filters?
Just remember that your vacuum, like your car, your furnace, and many other appliances in your home, requires maintenance to perform at its best. Replacing vacuum filters a few times a year is important for your machine.
Can you rinse HEPA filters?
A washable HEPA filter should be cleaned by rinsing it under cold water. You should be careful not to touch the filter material, only allowing it to come in contact with water. Allow the filter to completely dry before reinstalling it. Some filters have special instructions.
Where is the filter on Bissell vacuum?
More videos on YouTube
- First make sure your vacuum is turned OFF and unplugged.
- Press the tank release button on the top of the dirt tank and remove the tank.
- Open the tank lid by lifting the filter tab and pulling the lid up.
- The foam filter you see at the top of the tank is the pre-motor filter.
How do I change the filter on my Bissell vacuum?
To access the pre-motor filter, make sure your vacuum is turned off and press the dirt container Release Button then pull away from the vacuum. Next, twist the tank cover to the unlock position then pull up on the handle. The pre-motor filter should now be visable. Pull down on the filter to remove.