How do I reset my Weiser keypad lock?
How do I reset my Weiser keypad lock?
Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED ashes red. Press the Program button once more. In 20 seconds, when the LED ashes green and you hear one beep, the lock has been reset.
What is Weiser master code?
The lock is programmed with the default mastercode 0-0-0-0. Replace this with a code of your own. The mastercode must be 4-10 digits. Keep door open and unlocked during programming.
Can you reset a Weiser Smart Lock?
Weiser Lock reset: Hold the program button for 30 seconds until the status LED flashes red. Press the program button again. The lock has been reset when the LED flashes green. Verify the lock has been reset by pressing the lock button while the door is open.
What type of key does Weiser use?
SmartKey is compatible with the KW1 keyway. Is a Weiser lock with SmartKey re-key technology more secure than a traditional pin and tumbler lock? Yes, SmartKey re-key technology provides additional security: SmartKey is available in an ANSI Grade 1 deadbolt- certified the highest level of residential security.
How many pins does a Weiser lock have?
There are ten key pin heights and eleven key cut depths with the use of master pins.
What keyway does Weiser use?
BOTH CYLINDERS FEATURE SMARTKEY RE-KEY TECHNOLOGY 1b – User cylinder utilizes the traditional Kwikset keyway and keys.
How do I reset my Weiser Smartcode 10 code?
Keep door open. Press and HOLD the Program button until the keypad flashes green (about 5 seconds). 2. Enter new Mastercode.
How do you reset a combination lock if you forgot the code?
Resetting your Combination Lock
- Open the lock using the previous combination.
- Insert the reset tool in the hole on the side of the lock.
- Push the reset tool in and turn 90° in either direction.
- Set wheels to your new combination.
- Turn and remove the reset tool.
- Record your combination in a safe place.
How do I reset my Weiser Powerbolt 2?
Press and hold the “Reset” button for 5 seconds. You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset.