Contributing

How much does MyAir cost?

Standard

How much does MyAir cost?

To install an entire AC system with MyAir, single storey homes are around $10,000, double storey can start from around $15,000 but do require a site inspection or review of house plans to determine if a ducted system can be installed, and if so how complex it would be which would influence the price.

Why is my advantage air tablet not working?

If you are experiencing problems with the operation of the system, you may reset power to the system using the isolator switch located next to your air conditioner’s outdoor unit. Turn the isolator switch off and leave it off. Then try pressing the button to wake the touch screen. The touch screen should be inoperable.

How do I reset my advantage air tablet?

Advantage Air Status Codes

  1. Reset power to your mains by turning the power off at the main switch in your meter.
  2. Turn main switch back on.
  3. Once power has been restored to the touch screen wait an additional 5 minutes and test.
  4. If the screen does not restart then please contact our friendly support team and have.

What does the C mean on MyAir?

Your MyAir system may be set up with Constant Zones. These are pre-programmed zones that open up to relieve excess air pressure in your air-conditioning system if insufficient zones are open. Constant Zones are noted with a small letter “C” next to the air volume percentage of that zone.

How do you change the constant in an MyAir?

Press the + or – symbols to adjust the number. The air-con Fan speed can be set to low, medium, high, auto or myfan. myfan allows MyAir to automatically adjust the unit fan speed based on the current number of open zones. HANDY TIP: Your air-con unit is most efficient when maintaining a Target Temperature.

How do I update my Air Advantage tablet?

How to update your MyAir4 or e-zone air conditioning system on the Google Play Store (1).

  1. Step 1 – Press the SETTINGS button.
  2. Step 2 – Press the CLOSE APP button.
  3. Step 3 – Press the RUN OTHER APPS button.
  4. Step 4 – Press the APP draw button (Circle with 6 dots inside).
  5. Step 5 – Press the settings button.

Which gas in AC is best?

The most common HFC used in air conditioners is R-410A. This refrigerant is better than R-22 in terms of “Ozone Depletion” potential and energy efficiency, but it still causes global warming. A few more HFCs that are commonly used are: R-32 in Air Conditioners and R-134A in refrigerators.