Popular lifehacks

What is the correct command for voice VLAN?

Standard

What is the correct command for voice VLAN?

To display voice VLAN configuration for an interface, use the show interfaces interface-id switchport privileged EXEC command.

What command is used to enable the voice VLAN feature on a port?

We configure the interface in access mode and use VLAN 100 for the computer. The switchport voice vlan command tells the switch to use VLAN 101 as the voice VLAN.

How do I configure voice and data VLAN on the same port?

How to configure voice vlan + access vlan on the same port with a ArubaOS-CX SW6300F

  1. interface GigabitEthernet0/8.
  2. description ABC.
  3. switchport access vlan 30.
  4. switchport mode access.
  5. switchport voice vlan 10.
  6. switchport port-security maximum 4.
  7. switchport port-security.
  8. switchport port-security mac-address sticky.

How do I add a voice VLAN?

In the MAC address-based mode, there are three main steps to configure voice VLAN:

  1. Create a VLAN on the switch and add interfaces to the VLAN to implement Layer 2 interworking.
  2. Configure the OUI to match the source MAC address of the received packet.
  3. Configure the voice VLAN function on the interface.

Is the default VLAN for voice under VLAN translate?

VLAN 1
VLAN 1 is a default VLAN and cannot be configured as the voice VLAN. Only one VLAN can be set as the voice VLAN on the switch. To apply the voice VLAN configuration, you may need to further configure PVID (Port VLAN ID) and the link type of the port which is connected to voice devices.

How do I create a VLAN on a Cisco switch?

1) Issue the “configure terminal” command in order to enter the global configuration mode. 2) Create vlan using “vlan ” command and can assign name to vlan for description. 2) Issue the “interface [type] mod/port>” command in order to enter the interface configuration mode.

What is the difference between voice VLAN and data VLAN?

The LAN used for voice traffic from the IP phone is called the voice VLAN and the VLAN used for data is called the data or access VLAN.

What Cisco IOS command allows you to set up a voice VLAN?

To display voice VLAN configuration for an interface, use the show interfaces interface-id switchport privileged EXEC command. configure terminal Enter global configuration mode. configuration mode. PC or the attached device with the specified CoS value.

What is data and voice VLANs?

The LAN used for voice traffic from the IP phone is called the voice VLAN and the VLAN used for data is called the data or access VLAN. For the LAN switch to forward traffic correctly, it needs to know the VLAN ID of the voice VLAN as well as the data VLAN.