General

What is the default IP address of D-Link wireless router?

Standard

What is the default IP address of D-Link wireless router?

192.168.0.1
Step 1: Open your web browser and enter the IP address of the router into the address bar (not in google). The default IP is 192.168. 0.1, or using the link: http://dlinkrouter.local. Step 2: You should be taken to a D-Link login page.

How do I find my D-Link IP address?

Press the Windows key and R together. Type cmd in the box and click OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and default gateway of your adapter.

How do I log into my D-Link wireless router?

Step 1: Open your web browser and type in http://dlinkrouter.local. or type in the IP address of the router (default – http://192.168.0.1). Step 2: Enter or select the username (admin) and enter your password (blank by default), and then click OK or Log In. The password is case-sensitive.

How do I connect to Dlink router?

Follow these steps to set up your D-Link Router –

  1. Power on your D-Link Router.
  2. Connect your PC to the router using an Ethernet Cable or WiFi.
  3. A login page will appear.
  4. Now, you can configure and set up your router using the Internet Connection Setup Wizard.
  5. Under Wireless Setup enter SSID (WiFi Name) and Key (Password).

What is a 192.168 0.1 IP address?

The IP address 192.168. 0.1 is the most common address to access and configure wireless routers from a web browser. It’s a default address because specific IP address ranges are reserved for different types of networks, and 192.168. 0.1 is reserved for networks such as your home LAN.

How do I find my D-Link admin password?

The Forgotten Wi-Fi Password Resetting your D-Link® router’s Wi-Fi password is easy: Type your router’s IP address —192.168. 0.1— into your Web browser. At the login screen, select “Admin” from the drop down menu and enter your admin password.

How do I connect to my Dlink router?

How do I configure my D-Link wireless router?

Setting up a D-Link Router

  1. Open the router in a new browser tab. Open your browser and navigate to http://192.168.0.1, the default IP address of the D-Link router.
  2. Enter the D-Link router password.
  3. Setup a strong password.
  4. Select your Timezone.
  5. Configure your internet connection.

How do I reset my D-Link wireless router?

How do I reset my router to factory default settings?

  1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
  2. Step 2: Hold the paper clip down for 10 seconds and release.
  3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
  4. Note: