Easy Tips

How do I reset my Plantronics BackBeat Go 2?

Standard

How do I reset my Plantronics BackBeat Go 2?

To reset your BackBeat GO/BackBeat GO 2: Press the volume up and volume down buttons at the same time. The light flashes rapidly 3 times, and then the headset turns off. When you turn on the headset, it automatically goes into pairing mode (flashing red and blue) so that you can pair it with your phone or other device.

Why won’t my Plantronics headphones turn on?

If your headset seems to charge (i.e., the light turns on), but then won’t power on, try resetting the headset. While pressing the power button, plug in the AC charger. The light on the headset should turn on. Once the light turns on, let go of the power button.

How do I reset my Plantronics Wireless headset?

How to Reset a Plantronics Bluetooth

  1. Turn on the headset by pressing the “Power/Answer” call button.
  2. Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out.
  3. Wait for one minute for the reset to be complete.
  4. Turn on the headset again by pressing the “Power” button.

How do I turn on my Plantronics BackBeat?

Power on the headphones by pressing the power button until you hear “pair mode” and the LED light flashes red and blue. NOTE *Menus may vary by device. Select “PLT_BBFIT.” If necessary, enter four zeros (0000) for the passcode or accept the connection.

Where is the power button on Plantronics BackBeat FIT?

The headset LED turns off once charging is complete. Charge your headset for 15 minutes for up to a full hour of listening time. Click and hold the right earbud until you hear “power on” or “power off.” The left earbud has a touch sensor button.

Why are my PLT headphones not charging?

#1- Try a full reset Unplug the power from the charging base, then remove the battery and let both the battery and power adapter stay unplugged for 10 seconds. After 10 seconds re-plug both back in and you should now see the charging base start flashing green again under the battery light. That’s it!

What do I do if my Bluetooth headphones won’t charge?

Why Your Bluetooth Headphones Won’t Charge

  1. Headset has a faulty a battery.
  2. The headphones haven’t been charged in a while.
  3. The charging cable is faulty.
  4. There may be a problem with the charging port.
  5. Charge directly to a power outlet and not a USB hub.
  6. See if there are any debris in the port.
  7. Try a different charging cable.

Can you reset Plantronics headset?

Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware.

How do I pair my Plantronics wireless headphones?

BackBeat FIT: How to Pair

  1. Starting with your headset powered off, press and hold the power button until the LED flashes red and blue.
  2. Activate Bluetooth on your phone and set it to discover new devices. To do so:
  3. Tap PLT_BBT to complete the pairing.