Questions

Can you buy pre bent pipe?

Standard

Can you buy pre bent pipe?

1 inch pre bent steel tubing along with other diameters of pre-bent tubing is available. Of course, Detroit Tube Products can bend any tube to the exact specifications you need. Another popular bend we have is a 4-inch exhaust pipe bends.

What is DOM steel tubing?

Drawn Over Mandrel (DOM) Round Mechanical Tubing is a cold drawn 1020/1026 electric resistance welded tube with all the flash removed prior to cold drawing. In comparison to other tubing, DOM round steel tubing is produced to more exact OD and ID tolerances, and has the highest weld strength possible.

What does mandrel bent mean?

Mandrel bending is a method of rotary draw bending, in which – the mandrel, a solid mandrel shaft with up to five segmented, donut shaped, balls that are just slightly smaller than the ID of the pipe/tube that is being bent – is inserted into the pipe/tube to provide internal support during bending.

What is the difference between ERW and DOM tubing?

While both are “mild steel”, ERW is most often made from a 1010 alloy while DOM is most often 1026. DOM is typically more expensive and is considered a premium product compared to ERW by some fabricators.

Is mechanical tubing the same as Dom?

Drawn Over Mandrel Tubing Drawn Over Mandrel Mechanical Tubing (DOM) is a cold drawn 1020/1026 electric resistance welded tube with all of the flash removed prior to cold drawing. In comparison to traditional electric welded tubing, DOM tubing is produced to extremely tight OD and ID tolerances.

How do you bend tubing without a bender?

Use a blow torch (for harder materials) or a hair dryer (for softer materials) and heat the area where you want to bend the pipe. Once the material gets extremely hot, put on heat-resistant gloves and bend the pipe by hand.

What is stronger square or rectangle tubing?

Assuming that the rectangular section’s smallest dimension is equal to (or greater than) the square section’s side and their thicknesses are equal, then the rectangular section will always be stronger than the square, for any load in any orientation.