How thick will a hypertherm 65 cut?
How thick will a hypertherm 65 cut?
Cut capacity
| Capacity | Thickness | Cut speed |
|---|---|---|
| Cutting | ||
| Recommended | 20 mm (3/4″) | 500 mm/min (20 ipm) |
| 25 mm (1″) | 250 mm/min (10 ipm) | |
| Severance (hand cutting) | 32 mm (1-1/4″) | 125 mm/min (5 ipm) |
How many amps is a hypertherm 65?
The actual amperage draw with a 200 volt input line will range from about 42 to 70 amps (cutting thinnest to thickest materials), at 208 volt…
How thick can a Powermax 45 cut?
5/8″
The Powermax45® XP plasma cutter delivers increased cut capacity – up to 16 mm (5/8″) metal – as well as faster cut speeds, and automatic gas adjustment for quick, simple setup and operation. Duramax® Lock torches support handheld and me…
How thick will a hypertherm 85 cut?
Refer to the To… The Powermax85® 85-amp plasma power supply will stop manufacturing in December 2021, and will no longer be available for sale from Hypertherm….Cut capacity.
| Capacity | Thickness | Cut speed |
|---|---|---|
| Cutting | ||
| Recommended | 25 mm (1″) | 500 mm/min (20 ipm) |
| 32 mm (1-1/4″) | 250 mm/min (10 ipm) |
How thick metal will a 45 amp plasma cutter cut?
5/8 inch thick
The Titanium Plasma 45 has a lot of cutting power. It cuts fast and clean, leaving a dross-free edge, except when it cuts metal over 5/8 inch thick.
How many CFM does a plasma cutter need?
These requirements differ between systems, but as an example, an air compressor for a plasma cutter like the Hypertherm Powermax45® requires 6 cubic feet per minute (cfm) at 90 psi. It is important to keep in mind that these are MINIMUM requirements.
How many amps does a hypertherm 85 pull?
Hypertherm Powermax 85 plasma cutter has all the features and technology of the Powermax 65, but adds more power from an output current of 85 amps for clean, fast cuts on a wide range of electrically conductive metals, including 1″ Mild Steel at 20 ipm.