What size thread is a refrigerator water line?
What size thread is a refrigerator water line?
Most flexible copper refrigerator water lines have an outside diameter of 1/4 inch. Most flexible plastic water lines for refrigerators come with outside diameters of either 1/4 inch or 5/16 inch, reveals Darrin’s Plumbing Tips.
How do you clamp a refrigerator water line?
Unscrew the connector using locking pliers and purchase a cap or plug that will fit it. It’s easy to install the cap — just screw it on. Once it’s tight, turn on the water to make sure it doesn’t leak, then turn the water off again, and you’re ready to plug in the refrigerator and push it back against the wall.
How do you attach a nut and ferrule to a refrigerator water line?
Connect the Nut to the Fitting Slide a compression nut onto the water line as well as a ferrule. Remove the cap covering the refrigerator’s water line fitting. Connect the compression nut to the fitting on the back of the refrigerator where the water line exits the cabinet. Tighten the nut by hand.
Are all refrigerator water lines the same?
While water supply lines to refrigerators can be made of different materials like copper, plastic types and braided stainless steel, the good news is with adapters, most ice-maker supply lines should be able to connect to most refrigerators.
What size is ice maker thread?
¼”
Fluidmaster: The Leader In Toilet Repair
| Fluidmaster 12IM60 Ice Maker Connector | |
|---|---|
| Connection | ¼” Compression Thread x ¼” Compression Thread |
| Type | Female |
| Length | 5-Foot (60”) |
| Build | Highly Flexible Braided Stainless Steel |
What can I use instead of a saddle valve?
A similarly DIY-friendly but more reliable alternative to a saddle valve is a push-fit tee connector designed for ice makers and water dispensers. You install these by cutting out a short section of pipe and installing the tee right into the water line, then adding the small supply line leading to the appliance.
Can you use a brass ferrule on plastic tubing?
Brass ferrules are normally used on copper tubing and can cut into the soft plastic supply line.
Does the water line to refrigerator have to be copper?
Copper and plastic are two common materials for an ice maker water line, which is vital for refrigerators with water dispensers and ice makers. Both copper and plastic are suitable materials to get the job done; however, they both have their pros and cons.